Advanced inverter solutions in the industry.

5KW Pure Sine Wave Solar Inverter HFP Series

  • Model: HFP4850S80-145
  • Full digital double closed-loop control, combined with advanced SPWM technology to output pure sine wave;
  • 2 output modes: mains bypass and inverter output for uninterrupted power supply;
  • 4 charging modes: Solar Only, Mains Priority, Solar Priority, and Solar&Mains Charging;
  • Advanced MPPT technology ensures 99.9% efficiency;
  • ON/OFF rocker switch for AC output control;
  • Power saving mode available to reduce no-load loss;
  • Intelligent adjustable speed fan for efficient heat dissipation and extended system life;
  • Full protection, including overload and short circuit protection, under-voltage and over-voltage protection, and reverse polarity protection;
  • LCD screen and LED indicator design for real-time display of system data and operating status;
  • Support 6 units parallel connection.

HFP series is an all-in-one hybrid solar charge inverter integrating solar energy storage, mains charging energy storage and AC sine wave output. It adopts DSP control and advanced control algorithm, ensuring high response speed, high reliability, and high industrialization standards.

HFP series
HFP series

There are 4 charging modes: Solar Only, Mains Priority, Solar Priority, and Mains & Solar Charging; and 2 output modes, Inverter and Mains, which can meet different application requirements.

This inverter adopts a segment LCD display design to display the system operation data and operation status in real time. The comprehensive electronic protections keep the entire system safer and more stable.

HFP series
Model HV19250 HV192100 HV24050 HV240100 HV38450 HV384100 HV48050 HV480100
Nominal Voltage 192V 192V 240V 240V 384V 384V 480V 480V
Nominal Capacity 50Ah 100Ah 50Ah 100Ah 50Ah 100Ah 50Ah 100Ah
Energy 9.6kWh 19.2kWh 12kWh 24kWh 19.2kWh 38.4kWh 24kWh 48kWh
Charge Cut-off Voltage 218V 218V 200V 200V 435V 435V 545V 545V
Discharge Cut-off Voltage 160V 160V 270V 270V 320V 320V 400V 400V
Recommended Charge Current 25A 50A 25A 50A 25A 50A 25A 50A
Max. Charge Current 50A 100A 50A 100A 50A 100A 50A 100A
Max. Constant Discharge Current 50A 100A 50A 100A 50A 100A 50A 100A
Peak Current 100A 200A 100A 200A 100A 200A 100A 200A
Communication RS485/CAN RS485/CAN RS485/CAN RS485/CAN RS485/CAN RS485/CAN RS485/CAN RS485/CAN
Dimension (L*W*H) mm 460*330*480 600*600*1600 460*330*640 1530*600*600 460*330*780 600*600*1600 600*600*1600 1200*600*1600
Weight 100kg 190kg 170kg 260kg 280kg 500kg 350kg 600kg
Charge Temperature 0~50 °C 0~50 °C 0~50 °C 0~50 °C 0~50 °C 0~50 °C 0~50 °C 0~50 °C
Discharge Temperature -15~ 60°C -15~ 60°C -15~ 60°C -15~ 60°C -15~ 60°C -15~ 60°C -15~ 60°C -15~ 60°C

Technical Parameters

Models HFP4850S80-145
AC mode
Rated input voltage 220/230Vac
Input voltage range (170Vac~280Vac) ±2%;(90Vac-280Vac)±2%
Frequency 50Hz/ 60Hz (Auto detection)
Number of parallel / split phases 1-6
Frequency Range 47±0.3Hz ~ 55±0.3Hz (50Hz)/57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection Circuit breaker
Efficiency >95%
Conversion time (bypass and inverter) 10ms (typical)
AC reverse protection Available
Maximum bypass overload current 40A
Inverter mode
Output voltage waveform Pure sine wave
Rated output power (VA) 5000
Rated output power (W) 5000
Power factor 1
Rated output voltage (Vac) 230Vac
Output voltage error ±5%
Output frequency range (Hz) 50Hz ± 0.3Hz/60Hz ± 0.3Hz
Maximum Efficiency >92%
Overload protection (102% < load <125%) ±10%: report error and turn off the output after 5 minutes; (125% < load < 150%) ±10%: report error and turnoff the output after 10 seconds; Load >150% ±10%: report error and turn off the output after 5 seconds;
Peak power 10000VA
Loaded motor capability 3HP
Output short circuit protection Circuit breaker
Bypass breaker specifications 40A
Rated battery input voltage 48V (Minimum starting voltage 44V)
Battery voltage range Undervoltage alarm/shutdown voltage/overvoltage alarm /overvoltage recovery… settable on LCD screen
Power saving mode Load ≤50W
AC charging
Maximum charge current 60A
Charge current error ± 3Adc
Charge voltage range 40 –58Vdc
Short circuit protection Circuit breaker and blown fuse
Circuit breaker specifications 40A
Overcharge protection Alarm and turn off charging after 1 minute
PV charging
Maximum PV open circuit voltage 145Vdc
PV operating voltage range 60-145Vdc
MPPT voltage range 60-115Vdc
Battery voltage range 40-60Vdc
Maximum PV input power 4400W
Maximum PV input current 50A
Maximum charger power 4200W
PV charging current range (can be set) 0-80A
Charging short circuit protection Blown fuse
Wiring protection Reverse polarity protection
Certified specifications
Certification CE(IEC 62109-1)
EMC certification level EN61000, C2
Operating temperature range -15°C to 55°C
Storage temperature range -25°C to 60°C
Humidity range 5% to 95% (Conformal coating protection)
Noise ≤60dB
Heat dissipation Forced air cooling, variable speed of fan
Communication interface USB/RS485(WiFi/GPRS)/Dry node control
Size (L*W*D) 426mm*322mm*124mm
Weight (kg) 10.8

Get your Exclusive Offer!

Please fill out the form below or send an email to [email protected]
we will get back to you promptly.